Company News-Page 1

ZWF Structured Packing

2017-05-24

SUTONG ST-A series ZWF structured packing widely used in the process of distillation, absorption, regeneration, heat transfer, stripping, flashing, catching mist entrainment, etc. Product advantages: ZWF ZWF means “Zero wall flow”, the patent zero wall flow device keep the wall flow remains below 2%. Can overcome the loss of the separation efficiency caused by wall flow. Low pressure drop The pack...

Hump Support

2017-05-04

Hump support is a very excellent support for random packings, and it has has been widely applied . The beam type gas injection packing supporting plate is an excellent bulk packing supporting device, which is widely used.Characteristics as follows: 1. Good rigidity, large allowable load, can reliably withstand all kinds of pressure imposed on it. 2. It has excellent hydrodynamic properties. 3. The...

Standard Groove-tray Distributor

2017-04-11

Performance characteristics: 1. Multi-function It is an internal device that plays four roles: liquid collection, liquid distribution, gas distribution and side line extraction. 2. Placeholder It is a four-in-one gas-liquid distributor, and its total occupant height is about 0.5~1 m lower than that of the multi-hole tube distributor, multi-pole trough distributor and nozzle distributor.This create...

ST-V Vane Type Mist Eliminator

2017-03-30

ST-V Vane Type Mist Eliminator device is especially suitable for the top or side line of the tower gas phase outlet, in order to remove the Vane Type Mist Eliminator in the gas phase of fog droplets, droplets and trace solid particles.Especially when the gas phase contains trace solid particles and crystals, the new efficient Vane Type Mist Eliminator device has a strong anti-blocking performance,...

Wire Mesh Demister

2017-03-19

Application Purpose: In distillation, absorption, analysis, increase (decrease) wet and other gas (steam) liquid mass transfer, heat transfer unit operation, whether the use of packed tower or plate tower, are through the close contact and separation of two phases to promote the transfer of the same component, to achieve liquid or gas purification, increase (decrease) wet and other purposes.In the...

Bubble Cap Tray

2017-02-16

Bubble Cap Tray is one of the earliest mass transfer devices.The advantages are not easy to occur the phenomenon of liquid leakage, good operation elasticity. When the gas liquid has a large fluctuation, it can still maintain almost constant plate efficiency, the tray is not easy to block, suitable for processing various materials.Disadvantages: tray structure is complex, high cost, thick liquid l...

News