The demister/mist eliminator/filter is used to separate the droplets entrained by the gas in the tower to ensure mass transfer efficiency, reduce the loss of valuable materials and improve the operation of the compressor after the tower, reduce the water content, and extend the life of the compressor. Generally, the demister/mist eliminator/filter is set at the top of the tower. Therefore, it`s mainly used for gas-liquid separation. It can also be used for gas separation on air filters.
Discover the limitless possibilities of demister / mist eliminator in diverse applications, revolutionizing industries with their efficiency, versatility, and unparalleled performance. Explore their wide-ranging uses today.
Carbon Capture, utilization and Storage is one of the key technologies to cope with global climate change. This technology is a new development trend of CCS (Carbon Capture and Storage) technology, that is, the carbon dioxide emitted in the production process is purified and then put into the new production process, which can be recycled,rather than simply storage. Compared with CCS, carbon dioxide can be recycled, which can produce economic benefits and is more practical.
At the core of chemical innovation, our mass transfer and separation solutions drive efficiency and productivity across diverse processes.
Pioneering the petrochemical landscape, our cutting-edge solutions ensure seamless separation and mass transfer within complex refining processes.
We have comprehensive process technology in NOx, CO2, Acid Gasesand Alcohols Esters Liquid Waste treatment .
Cultivating growth from the ground up, our solutions provide the essential tools for efficient fertilizer production and processing.
We can provide separation processtechnology in Distillation, Absorption,Extraction, Regeneration, Evaporation,Stripping and other relevant processes.
Wire mesh demister is widely used in Petrochemical and other industries, the performance index: can remove 3~5μm particles, and the pressure drop is not large, usually less than 250pa. Low cost, large operation flexibility. Under 30%~110% design loads operation, the efficiency also without any reduce.
In case of solid particles, only need to add flusing device or adpot drawer type demister, then ready to use.
Vane type mist eliminator is particularly applies in the column top or the side vapor outlet, to remove the mist droplets, liquid entrainment and slight solid particles in the vapor.
Especially in case of slight solid particles and crystals, the vane pack type demister has strong anti-clogging performance, the wire mesh demister can't replace it. For liquid droplets larger than 5μm, the removal efficiency is usually over 95%.
ST-M2 type droplet separator is suitable for vertical flow scrubber.
Main features: low pressure loss, high separation efficiency, easy installation, remove and maintenance, low costs.
High loads, large handling capacity, low pressure drop and high operation flexibility.
With significant effect in mist and dust processing, the mist efficiency reach up to about 90%~99%.
Process Package Design
Potential-digging Revamp
Process Simulation and Optimization
Process and Hydraulic Calculation
Detailed Design of Column Internals
Strength Design of Column Internals
Trouble-shooting and Consulting
Start-up Guidance
Column Internals Installation
Guidance of Installation
Technical Training
Centralized Industrial Zone Of DongShe Town, Tongzhou District, NanTong City, Jiangsu P.R. China